MEP SHARK 282 SXI - Evo

•  
  Número de referencia 1108-66326

  Horas en funcionamiento Sin resultados

• Proveedor

  WMT GmbH & Co.KG
  Siemensstraße 1
  46342 Velen-Ramsdorf

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Sierras, limadoras y tronzadoras

• Tipo de máquina

  Sierras de cinta horizontales

• Fabricante

  MEP

• Datos técnicos

  cutting diameter

  250 mm

  capacity 90 degrees: flat

  280 x 220 mm

  capacity 90 degrees: square

  220 x 220 mm

  vice

  285 mm

  turning speed range:

  36/72 m/min

  dimensions of saw-band

  2950x27x0,9 mm

  total power requirement

  1,5 / 1,8 kW

  weight of the machine ca.

  485 kg

  dimensions of the machine ca.

  1700 x 1000 x 1800 mm

• Descripción

  Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO
  with semi-automatic-dynamic, manual function, has a MEP-28 control
  for miter cuts from 45° right to 60° left.
  Semi-automatic function:
  At the start of the cycle: - Vice closes and motor starts
  – Saw head lowers for the cut – Motor switches off – Saw head rises –
  Vise opens.
  Semi-automatic dynamic system (manual lowering of the saw band bow up to
  to the desired position and cycle start via the manual button.)
  Some features:
  New centralized control console on an articulated arm to allow the operator
  can be easily switched from any working position.
  Low voltage control panel:
  Polyester membrane keyboard with thermoformed highlighted
  Push buttons and actuation control signal.
  Display to show:
  * Diagnostics (messages in the user language)
  * Alarms (description of alarm causes)
  * State of inputs and outputs
  * Counting cuts
  * Time taken for the cut made
  * Current consumption of the saw blade motor
  * Saw blade tension
  * Blade speed
  * Numerical display of head position.
  Switch handle IP55 of manual 24V cycle.
  Complete program of all special cutting cycles.
  Identification of other possible special cutting cycles for special ones
  Applications
  New, latest generation hydraulic control unit, extremely powerful
  and with low energy consumption.
  Large work surface with turntable on roller bearings, measuring 265 mm
  preloaded thrust bearing, mounted.
  Double belt speed (36/72 m/min.) with control
  Intended to accommodate an electronic inverter for the
  Continuous regulation of the belt speed from 20 to 90 m/min.
  Stroke of the saw bow can be programmed directly from the control panel
  Adaptation to the cutting material.
  Clamping device can be moved laterally to the left and right
  Quick release vice.
  Manually operated strap tension control with display on the screen
  electronic converter.
  Base frame with pull-out coolant tray.
  Electric coolant pump for cooling and lubricating the saw band.
  Preparation for installing the minimum blade lubrication kit
  (Optional), in addition to the conventional standard lubrication
  Emulsion oil.
  Chip clearing brush.
  The machine is intended for pallet truck transport.
  Length stop for cuts of the same length
  Material support arm with roller for attaching the loading platform
  Bimetal saw band for solid and profile material.
  Tools and instructions for use in the respective user language.
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Estado

  Usado