GLEASON 513

•  
  Número de referencia 1049-385316

  Fabricación 1975

  Horas en funcionamiento Sin resultados

• Proveedor

  Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
  James-Watt-Straße 12
  72555 Metzingen

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Máquinas de tallar engranajes

• Tipo de máquina

  Centros de mecanizado de engranajes cónicos

• Modelo de máquina

  Máquinas de ensayo de engranajes cónicos

• Fabricante

  GLEASON

• Datos técnicos

  max. wheel diameter

  400 mm

  gear width

  0 mm

  module

  pinion diameter - max.

  254 mm

  axial cross angle

  90 °

  total power requirement

  15 kW

  weight of the machine ca.

  t

  dimensions of the machine ca.

  m

• Descripción

  G L E A S O N (USA)
  Hypoid Spiral Bevel Gear Running Testing Machine
  Model 513 TESTER, Year 1975, Serial No. 721607
  
  This machine is very suitable for precision production testing of spiral and
  hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and
  the pinion spindle is horizontal.
  The pinion cone distance can be adjusted while the machine is working in
  order to find the optimal mounting position whereby the gear is "loaded"
  with a preset torque.
  The axial pinion position can be adjusted until the quietest meshing position
  of the traction flank is found. Likewise, the thrust flank can be tested
  during the return run.
  Marking compound is sprayed on both sides of the teeth so the flank contact
  pattern can be seen. Working cycles, as well as the positioning in the
  tooth gap, are automatic. The gear quality can be assessed by recording the
  harmonic frequencies, which are displayed on a separate monitor and which
  can be analyzed with a RHF Control. Machine can be used for soft testing of
  production parts, as well as for mating sets of hardened gears and pinions
  prior to lapping, and for final testing after lapping to select the optimum
  pinion mounting distance. Also ideal for lab work, processing, and quality
  control.
  
  Max. gear outside diameter, approx. 508 mm
  Max. pinion outside diameter, approx. 254 mm
  Axial cross angle 90 °
  Offset of pinion spindle above/below gear spindle, max. 102 mm
  Diameter of taper hole, pinion spindle 99/95 mm
  Diameter of taper hole, gear spindle 56/55 mm
  Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm
  Speeds of gear spindle, infinitely variable 0 - 1,250 rpm
  
  Spindle drive, approx. 5 / 7.5 kW
  Total electrical load, approx. 15 kW - 380 V - 50 Hz
  
  Accessories / Special Features
  * Large display for 1 / 2 / 3 harmonies, display for pinion distance,
  pinion speed, as well of gear torque in kg/torque, etc.
  * Hydraulic workpiece clamping. * Hydraulic slide clamping.
  * Tank for marking compound with mixer and pump, separate.
  * Separate switch cabinet. * Separate hydraulic unit.
  * Lots of spare parts, spare motors, etc.
  
  Condition : Good. Machine can soon be inspected under power.
  Delivery : Ex stock, as inspected.
  Payment : Net, after conclusion of contract.
  
  
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• Estado

  Usado