KAISER KSTU ZA 2000-15P

•  
  Número de referencia 43706

  Fabricación 1994

  Horas en funcionamiento Sin resultados

• Proveedor

  ProdEq Trading GmbH
  Reckholder 1
  9527 Niederhelfenschwil

  Switzerland

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Prensas con accionamiento mecánico

• Tipo de máquina

  Prensas escalonadas de dos columnas

• Fabricante

  KAISER

• Descripción

  PRESS DESIGN
    drive system: eccentric / crank
    frame design: H-frame, tie rod
    openings in uprights: yes
    table cushion: yes
    feedstock transport direction: left to right
  
  PRESS FORCES
    total force (nominal): 200 to
  
  PRESS TABLE
    table surface (left-right): 1780 mm
    table surface (front-back): 1300 mm
    opening in bed (left-right): 1445 mm
    opening in bed (front-back): 260 mm
  
  SLIDE
    slide force: 200 to
    table surface (left-right): 1500 mm
    table surface (front-back): 1100 mm
    stroke: 178 mm
    stroke rate (max.): 120 /min
  
  SLIDE (MECHAN. PRESS)
    slide adjustment: 150 mm
    stroke rate (min.): 20 /min
    stroke rate (max.): 120 /min
  
  DIE CUSHION (TABLE CUSHION)
    number of cushions: 11
    cushion force: 3 to
  
  TOOL ASSEMBLY DIMENSIONS
    shut height (stroke down, adjustment up), BDC: 542 mm
  
  DECOILER
    design: twin reel
    sheet width max.: 260 mm
    coil weight max.: 2 to
    max. diameter of coil: 1500 mm
    mandrel expansion range from: 460 mm
    mandrel expansion range up to: 530 mm
  
  LEVELLER UNIT
    sheet width max.: 250 mm
    sheet thickness max.: 2 mm
    sheet thickness min.: 0.3 mm
    number of leveller rolls: 19
    diameter of leveller rolls: 18 mm
    feed velocity min.: 5 m/min
    feed velocity max.: 60 m/min
    loop controls: yes
  
  STRIP-FEEDER
    feeder type: roll feeder
    sheet width max.: 250 mm
  
  TRANSFER SYSTEM
    distance between tools, stroke X max.: 260 mm
    distance between tools, stroke X min.: 60 mm
    stroke Y fix: 55 mm
    Inner width clamping rails closed max.: 455 mm
    Inner width clamping rails closed min.: 205 mm
  
  ELECTRICAL SPECIFICATIONS
    mains voltage: 400 V
    mains frequency: 50 Hz
  
  ATTACHMENTS (PRESSES)
    decoiler: yes
    leveller unit: yes
    strip feeder: yes
    gripper transfer system: yes
  
  
  + Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data sheet available)

• Estado

  Usado