CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 Lehmann-Robot

•  
  Número de referencia 1070-100702

  Fabricación 2011

  Horas en funcionamiento Sin resultados

• Proveedor

  BTT Bosetti Tech Transfer
  Sch”nblick 2
  75228 Ispringen

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Tornos

• Tipo de máquina

  Centros horizontales de torneado y fresado

• Fabricante

  MORI SEIKI

• Descripción

  standard turning dia.:200
  turning length:max. 810 mm
  control:MSX-701 MAPPS IV
  greates pass round over bed:800 mm
  Max. distance between centres:1130 mm
  max. turning diameter:320 mm
  max. workpiecediameter:300 mm
  bar material dia.:65 mm
  Traverse X-Axis 1:210
  Traverse X-Axis 2:210 mm
  Traverse X-Axis 3:210 mm
  Traverse Y-Axis 1:110 (+65/-45) mm
  Traverse Y-Axis 2:110 (+45,/-65) mm
  Traverse Z-Axis 1:300 mm
  Traverse Z-Axis 3:300 mm
  Traverse Z-Axis 2:810 mm
  Traverse B-Axis:870 mm
  turning speed range - spindle:5.000 1/min
  Number of spindle speed ranges:2 .
  spindle nose:JIS A2-6
  spindle bore:73 mm
  spindle bearing diameter:120 mm
  C-Axis:0,001 °
  turning speed range - spindle:5.000 1/min
  spindle nose:JIS A2-6
  spindle bore:73 mm
  bar material dia. max:65/52 mm
  spindle bearing diameter:120 mm
  C-Axis:0,001 °
  Number of Turrets:3 .
  Number of tool stations:16 x 3=48 pos
  Schank height for square tool:20 mm
  Diameter of boring bar:32 mm
  turret changing time (4-stations):0,18 sec
  Number of driven tools:16 x 3=48 pos
  max. spindle speed driven tools:6.000 U/min.
  Rotary tool machining ability:M16 / Ø16 .
  rapid traverse X-axis:30 m/min
  rapid traverse Y-axis:20 m/min
  rapid traverse Z-axis:50 m/min
  drive capacity - spindle motor:25 / 22 kW
  power capacity - driven tools:7,5 / 5,5 kW
  total power requirement:92,7 kVA
  weight of the machine ca.:9,4 t
  dimensions of the machine ca.:4,0 x 2,8 x 2,4 m
  Y-axis:2 x
  Spindle 1 Chuck:SMW KNCS-N 210 / 52 mm
  Spindle 2 Collet Chuck:Hainbuch Spanntop nova Kombi Axfix 65
  
  CNC Turning- and Milling Center
  MORI SEIKI NZ 2000 T3Y2
  
  The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets.
  For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading .

• Estado

  Usado