DMC 65 monoBLOCK (Reference-Nr. 020258)

•  
  Número de referencia 020258

  Fabricación 2020

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Centros de mecanizado

• Tipo de máquina

  Centros de mecanizado (universales)

• Fabricante

  DMG MORI

• Control

  Heidenhain

• Descripción

  
  

  General
  Universal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Floor space/Weight
  Weight approx.	16800 Kg

• Especificación

  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Package Mill / Turn HSK-A 63	Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 35 kW /
  Tool magazine, chain vert., 60 pockets	Tool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle taper
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60 SK 40 or optionally chosen spindle taper
  Tool measuring in machining area Blum Laser FD	Tool measuring in machining area Blum Laser DIGILOG Laser-system for milling tools, 3D touch-probe for turning tools
  Tool breakage control mechanical	Tool breakage control mechanical version
  VCS Complete extension package	VCS Complete extension package for each further machine: software / password (only in conjunction with option measuring probe or existing set of measuring tools)
  TCC Tool Control Center basic HSK-A63	TCC Tool Control Center basic HSK-A63 - Detection of soiling at the tool interface - Spindle protection by monitoring the max. forces - Determination of the tool pull-in force
  Production package 40 bar/23 l/min, 600 l tank MT	Production package (M / T): belt chip conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar / 23 l/min - 580 psi / 6 gpm through spindle centre (AD) Exter
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines

• Estado

  Usado