NT 6600 DCG|3000 (Reference-Nr. 190070)

•  
  Número de referencia 190070

  Fabricación 2015

  Horas en funcionamiento Sin resultados

• Proveedor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Categoría principal

  Máquinas para trabajar el metal

• Categoría

  Centros de mecanizado

• Tipo de máquina

  Centros de mecanizado (universales)

• Fabricante

  DMG MORI

• Control

  Fanuc

• Descripción

  
  

  General
  Turning-milling centre; Control: Fanuc 31iB5
  Characteristics
  Swing- Ø, max.	1070 mm
  Drive power milling spindle	22 kW
  Drive power second spindle	22 kW
  Drive power main spindle	22 kW
  Number of Toolmagazine positions	50
  Speed max.	8000 rpm
  Slewability of B-Axis	1 degree
  Movements X / Z / Y	1040/+-330/3150 mm
  Milling spindle upper side	1
  Input precision of C-axis on Counterspindle	0,0001 degree
  Bar diametre	164 mm
  Input precision of C-axis on Mainspindle	0,0001 degree
  Spindle speed 2nd Spindle max.	1500 rpm
  Bar diametre	164 mm
  Speed max.	1500 rpm
  Max. Turning Length	3076 mm
  Max machining diameter	1070 mm
  Weight approx.	46000 Kg

• Especificación

  
  

  Tool spindle full indexing specifications	Erhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse der
  Spindle 2 tailstock specifications	Spindle 2 tailstock specifications You can use spindle 2 also as a tailstock. The servo motor on the B-axis equips a brake to prevent spindle 2 from going back in case of emergency stop or power failure. Center is fitted by clamping it with chuck's jaw.
  Preparation for automatic centering steady rest SMW SLU-6Z (servo-driven) (single) (/3000, /4000) (High Rigidity specification)	Preparation for Automatic Centering Steady Rest SMW SLU-6Z (Servo- driven) (Single) (/3000, /4000) (High Rigidity Specification) This is an I/F for automatic centering steady rest body attachment. The steady rest prevents vibration and deflection of a lo
  Coolant float switch (lower limit detection)	Coolant Float Switch (Lower Limit Detection) It controls the coolant level (lower limit detection). An Alarm is displayed on the operation panel when the coolant falls below the set level.
  Knoll KF110/700 Filter System 7.0 MPa	Knoll KF110/700 Filter system 7.0 MPa - 31 l/min - 5.5kW high pressure coolant pump - vario valve - paper filter - 700 l coolant tank with cleaning opening - float switch - electrical connection 3x400 V - hose assembly (5m) and interface cable (10m). With
  Super-high-pressure coolant system I/F (7.0 MPa, KNOLL)	Super-high-pressure coolant system I/F (7.0 MPa, KNOLL) We have prepared an I/F for the high-pressure coolant unit (Knoll). * High pressure coolant unit main body (Knoll) is not included in this specification.
  Air blow for tool tip (tool spindle)	Air blow for tool tip (tool spindle) The air blow removes chips adhering to the tool tip. The air blow is controlled by M codes in the program. The air blow is turned on by M458, and off by M459.
  Chip conveyor (right discharge, hinge type) (/3000)	Chip conveyor (right discharge, hinge type) (/3000) Chips are loaded onto hinge type plates and discharged outside the machine. This is effective when discharging long chips. It is not suitable for discharging minute powdery chips generated when machini

• Estado

  Usado